WonderMedia Technologies, Inc.
W-Load Version : 0.19.00.01
ethaddr............found


U-Boot 1.1.4 (Oct 27 2010 - 11:14:28)
WonderMedia Technologies, Inc.
WMT U-Boot Version : 0.12.01.00.33
U-Boot code: 03F80000 -> 03FCA86C  BSS: -> 0401BE84
RAM Configuration:
Bank #0: 00000000 128 MB
boot from spi flash.
flash:
     Bank1: FFF80000 -- FFFFFFFF
     Bank2: FF780000 -- FFF7FFFF
Flash:  8.5 MB
In:    serial
Out:   serial
Err:   serial
bootcmd="usbinit;fatload usb 0 3c00000 logo.bmp;logo show;run text1"
usb usb1: Product: USB Host Controller
usb usb1: Manufacturer: Linux 2.6.10_dev-VT8610 ehci_hcd
usb usb1: SerialNumber: pci-echi
 1-0:1.0: USB hub found
 1-0:1.0: 2 ports detected
locktree(): line: 1024: this function not completed
usb 1-: new high speed USB device using abc and address 2
usb 1-: Product: Flash Disk      
usb 1-: Manufacturer: Generic 
usb 1-: SerialNumber: CCBB1012031148201242545304
       scanning bus for storage devices... part_offset : 3f, cur_part : 1
1 Storage Device(s) found
usb 1-+11111111010010: new high speed USB device using abc and address 3
usb 1-+11111111010010: Product: USB2.0 Hub
       scanning bus for storage devices... 1 Storage Device(s) found
part_offset : 3f, cur_part : 1
reading logo.bmp
Tina_Match: isdir 0x0######################
mydata : 
Size of clusters in sectors : 4
The sector of the first cluster, can be negative : 97
Current FAT buffer : 03f4d6fc
fatbufnum : ffffffff
Length of FAT in sectors : 3f
Size of FAT in bits : 10
Starting sector of the FAT : 1
Start sector of root directory : 7f
...........

0x119436 bytes read
show logo .....
LCD param (setting): 1,30000,8,800,480,48,40,40,3,29,13
PWM param (setting): 0,4,599,599
LCD FrameBuffer = 0x07900000, BMP Address = 0x03C00000
Loading BMP ..... 
colorBits = 24
logo_width = 800, logo_height= 480
lcd_width= 800, lcd_height = 480
ok
no string .... 
PWM0 input freq = 47916666 Hz, output freq = 19998 Hz
PWM0 register setting: scalar = 3, period = 598, duty = 598
"Uberoid" 
REG32_VAL(0xd8000440) = 0x10101000
memory size: 256MB
### main_loop entered: bootdelay=1

Execute register operation:
  reg op: 0xD8110064 | 0x4
  reg op: 0xD811008C | 0x4
  reg op: 0xD81100B4 & 0xFFFFFFFB
  reg op: 0xD8110064 | 0x8
  reg op: 0xD811008C | 0x8
  reg op: 0xD81100B4 | 0x8
  reg op: 0xD8130054 | 0x1
### main_loop: bootcmd="fatload usb 0 fc00000 animation.data;fatload usb 0 0 uzImage.bin;bootm 0"
Hit Enter key to stop autoboot:  1  0 
WMT # 
WMT # mmcinit
ATSMB Host 390KHz 

SD2_0  : SDHC card!

Init  : card selected !

set blocklen fun. !

SD:Four Bits Mode!
SD Card High Speed!

Initial SD Card OK!
ATSMB Host 25MHz 
SD clock is 25Mhz
register mmc device
part_offset : 5000, cur_part : 1
WMT # fatload mmc 0 0 wload.bin
part_offset : 5000, cur_part : 1
reading wload.bin
Tina_Match: isdir 0x0######################
mydata : 
Size of clusters in sectors : 1
The sector of the first cluster, can be negative : 1fa0
Current FAT buffer : 03f4d6fc
fatbufnum : ffffffff
Length of FAT in sectors : fc1
Size of FAT in bits : 20
Starting sector of the FAT : 20
Start sector of root directory : 1fa2

0xFFF8 bytes read
WMT # erase ffff0000 +10000
Erase Flash from 0xffff0000 to 0xffffffff in Bank # 1 
Erasing sector  7 @ FFFF0000... ok.
Erased 1 sectors
WMT # cp.b 0 ffff0000 10000
Copy to Flash... done
WMT # fatload mmc 0 0 u-boot.bin
part_offset : 5000, cur_part : 1
reading u-boot.bin
Tina_Match: isdir 0x0######################
mydata : 
Size of clusters in sectors : 1
The sector of the first cluster, can be negative : 1fa0
Current FAT buffer : 03f4d6fc
fatbufnum : ffffffff
Length of FAT in sectors : fc1
Size of FAT in bits : 20
Starting sector of the FAT : 20
Start sector of root directory : 1fa2

0x4A86C bytes read
WMT # erase fff80000 +50000
Erase Flash from 0xfff80000 to 0xfffcffff in Bank # 1 
Erasing sector  0 @ FFF80000... ok.
Erasing sector  1 @ FFF90000... ok.
Erasing sector  2 @ FFFA0000... ok.
Erasing sector  3 @ FFFB0000... ok.
Erasing sector  4 @ FFFC0000... ok.
Erased 5 sectors
WMT # cp.b 0 fff80000 50000
Copy to Flash... done
WMT #